การค้นหาค้นหา
lc12 two component solvent free silicone conformal coating
lc12 two component solvent free silicone conformal coating

LC12สองส่วนประกอบซิลิโคนปราศจากตัวทำละลายเคลือบ Conformal

เคลือบ Conformal เรียกอีกอย่างว่าน้ำมันป้องกันแผงวงจรอิเล็กทรอนิกส์ PCB, น้ำมันเคลือบ, สีป้องกันความชื้น, เคลือบสามหลักฐาน, กาวกันน้ำ, สีฉนวน, สีป้องกันการกัดกร่อน, สีสเปรย์ป้องกันเกลือ, สีกันฝุ่น, สีป้องกัน, สีเคลือบ, กาวป้องกันการกัดกร่อนสามสี

เคลือบเรซินซิลิโคนปราศจากตัวทำละลายสองส่วนประกอบมีลักษณะของการปกป้องสิ่งแวดล้อมการยึดเกาะที่ดีมีความแข็งแรงสูงความแข็งสูงทนต่อแรงกระแทกจากความร้อนทนต่ออุณหภูมิสูงและต่ำทนต่อความชื้นความต้านทานรังสี, ฉนวนกันความร้อน, สารหน่วงไฟโปร่งใสฯลฯ


Description of LC12 Two-Component Solvent Free Silicone Conformal Coating


This product is a two-component solvent free silicone coatings. For convenience storage, it's designed as two-component, adding B component crosslinking agent, it can be stored for seven days when sealed without water.

It does not contain solvents, environmental friendly, good adhesion, high strength, high hardness, resistance to cold and hot shock, resistance to high and low temperature, moisture-proof, radiation protection, insulation, transparent flame retardant and other characteristics. It's suitable for hybrid integrated circuit boards, automotive electronic control board, aviation instrument panel, flexible circuit board, the computer control panel, semiconductor crystal line protection; In LED module display sealing, due to high refractive index, it can prevent lamp bead color temperature drift well and will not affect the lamp lumens of pearl.

LC12-1: Contrast Light Moisture Curing Drape Coatings, the product can meet 94V0 flame retardant grade, hardness is 25HD.

LC12-2: Contrast Light Moisture Curing Drape Coatings, the product can meet 94V1 flame retardant grade, hardness is 35HD, viscosity is lower.


Instructions of LC12 Two-Component Solvent Free Silicone Conformal Coating


Mixing in accordance with the A: B = 100:2, stirring evenly, no need to add any thinner or solvent, and then spraying, dipping, brushing; After mixing, it must be sealed to prevent moisture to enter, it will be good to fill nitrogen to replace air, then it can be placed 7 days, viscosity will have no changes.

LC12-1: After 130°C heat drying tunnel in 2 to 3 minutes, let the surface is completely dry. In order to conveniently into next working procedure, placing 72 hours so that it cures at room temperature.

LC12-2: Cured by UV light source. After UV light source is cured, the surface is slightly sticky. It can also be baked at 130 degrees for 2-3 minutes, so that the surface is completely dry and easy to enter the next process, and then placed at room temperature for 72 hours until it's fully cured.

LC12-1: Without heat curing, the gel time is longer, which ensures that the gun nozzle will not be blocked during spraying and other constructions.

LC12-2: In the absence of light curing and heat curing, the gel time is longer, which ensures that the gun nozzle will not be blocked during spraying and other constructions.

Storage: A and B components need to be sealed and stored away from light.


Typical Technical Properties of LC12 Two-Component Solvent Free Silicone Conformal Coating


Item

LC12-1

LC12-2

Appearance:

translucent liquid with fluorescent indicator

translucent liquid with fluorescent indicator

Solid Content:

100%

100%

Viscosity mp.s:

480

400

Hardness:

25HD

35HD

Adhesion:

Level 1

Level 1

Tensile Strength:

5.5Mpa

5.5Mpa

Flame Retardant:

94V0

94V1

Refractive Index:

1.53

1.53

Absorb UV Wavelengths

-

365-385

UV Energy:

-

200-400mj/cm2 the paint is set, the surface is slightly sticky

Moisture Absorption Surface Dry Time:

2 hours, 72 hours to dry

2 hours, 72 hours to dry

Temperature Resistance:

-60~280°C

-60~280°C

Impact Strength:

1.27-1.32 Kj/m2

1.27-1.32 Kj/m2

Volume Resistance:

1*1015 Ω·cm

1*1015 Ω·cm

Dielectric Constant:

3.0 @60Hz

3.0 @60Hz

Dielectric Strength:

21 kv/mm

21 kv/mm

Dissipation Factor:

5*10-3 @60hz

5*10-3 @60hz

Softening Point:

145-160°C

145-160°C

Flexibility Bending 1/8m:

no cracks

no cracks

Moisture Resistance:

85°C. 85 humidity, no change in hardness or shedding for 30 days

85°C. 85 humidity, no change in hardness or shedding for 30 days

Water Drop Angle:

106 degree, water drops fall naturally

106 degree, water drops fall naturally

Corrosion Resistance:

weak acid, weak base, salt water, 30% alcohol, 30% methyl ethyl ketone, disinfectant, no corrosion

weak acid, weak base, salt water, 30% alcohol, 30% methyl ethyl ketone, disinfectant, no corrosion


Package & Storage of LC12 Two-Component Solvent Free Silicone Conformal Coating


  • In 200kg drum.

  • Keep in cool, dry and ventilated place. Keep away from sunlight and fire sources. Keep in unopened containers, shelf life is 12 months from the date of production. It is shipped as non-hazardous substance.

เลนไซเลนและซิลิโคนมืออาชีพของคุณ
เลนไซเลนและซิลิโคนมืออาชีพของคุณ
Nanjing Silfluo New Material Co., Ltd.
ติดต่อเราได้เลย
พยายามอย่างดีที่สุดเพื่อตอบสนองความต้องการของคุณ
ข่าวอะไรที่ silfluo
ลิขสิทธิ์ค่ะ © Nanjing Silfluo New Material Co., Ltd. สงวนลิขสิทธิ์.
inquiry@silfluo.com
0086-18351817618